Designing a non-contact sensor for capturing pacemaker

International Journal of Computer Trends and Technology (IJCTT)          
© 2020 by IJCTT Journal
Volume-68 Issue-7
Year of Publication : 2020
Authors : Mohammad Almasi


MLA Style: Mohammad Almasi  "Designing a non-contact sensor for capturing pacemaker" International Journal of Computer Trends and Technology 68.7 (2020):43-48. 

APA Style Mohammad Almasi. Designing a non-contact sensor for capturing pacemaker. International Journal of Computer Trends and Technology, 68(7),43-48.

The obtained advances in the heart surgery from the mid - 20th century, has created the need for artificial means to stimulate the heart muscle. Initially, pacemakers were developed as machines outside the body and large, but technological advances led to the shrinking and miniaturization of electronic circuits and eventually the development of ICD devices. with recent advances pacemakers have also been developed without lead, and these advances to be continued. In this thesis, an FPGA based on PACEMAKER is proposed. The algorithm implemented in the Xilinx - type FPGA which is programmed using VHDL and ISE software. simulation results show the ability of the system to detect the absence of a heartbeat in the expected times, and/ or to generate the required pulses or beats. In the following, an idea is presented at the end of the paper to continue the work, which has the ability to transform the device into a node and form a database of heart patients which can contribute to improving the health situation of the community and reduce the high mortality rate caused by heart disease.

[1] A. Kumar, R. Komaragiri, M. Kumar, “Design of efficient fractional operator for ECG signal detection in implantable cardiac pacemaker systems”, Int. J. Circ. Theory Applications, pp. 1–18, 2019.
[2] M. Penhaker, M. Heczko, “Computer Based Controlled Pacemaker Implementation”, IFAC-PapersOnLine 48-4, pp. 448-453, 2015.
[3] S. Ray, R. Srivastava, R.P. Tewari, B. Kumar, M. Sharma, N. Sahai, D. Bhatia, “Implementation of Low Delay Dual Chamber Pacemaker Using Verilog”, 6th International Conference on Signal Processing and Integrated Networks (SPIN), IEEE, 2019.
[4] O. Dwivedi, G. Srivastava, “Design and Implementation of Programmable Cardiac Pacemaker Using VHDL”, Int. Journal of Engineering Research and Applications, Vol. 5, Issue 5, pp. 155-158, 2015.
[5] A.Kaur, A. Kaur, “Design and Analysis of A Dual Chamber Cardiac Pacemaker Using VHDL in Biomedical Application”, International Journal on Recent and Innovation Trends in Computing and Communication, Volume 2, Issue 7, pp. 2007-2009, 2014.
[6] E. Andreozzi, G. D. Gargiulo, A. Fratini, D. Esposito, P. Bifulco, “A Contactless Sensor for Pacemaker Pulse Detection: Design Hints and Performance Assessment”, Sensors, vol. 18, no. 2715, pp. 1-19, 2018.
[7] S. Chede, K. Kulat, “Design Overview of Processor Based Implantable Pacemaker”, Journal of Computers, Vol. 3, No. 8, pp. 49-57, 2008.
[8] Naila Bano, Agha Zafarullah, Mohsin Ali,(2020). “Analysis of Partial Discharge Model Under Various Stress Conditions”. SSRG International Journal of Electrical and Electronics Engineering 7(2), 14-17.
[9] M. Alimardani and M. Almasi, “Investigating the application of particle swarm optimization algorithm in the neural network to increase the accuracy of breast cancer prediction,” International Journal of Computer Trends and Technology, vol. 68, no. 4, pp. 65–72, 2020.
[10] M. Almasi and M. Alimardani, “Application of Self- Organizing map for Time-varying biological to predicting of complexity Systems,” International Journal of Computer Trends and Technology, vol. 68, no. 4, pp. 59–64, 2020.
[11] Dr.Chandrakanth G Pujari. “Supporting Structure For Prioritizing And Assigning Six Sigma Software Projects Using Fuzzy Logic Topsis And Fuzzy Logic Expert System” International Journal of Computer Trends and Technology, 68(2),25-33

heart disease, pacemaker, heart rate . Electrocardiography, signal processing, arrhythmia, Micro Electronics,