Enhancement of the Performance of Automobile Refrigeration System by using a Cellulose Pad

  IJCTT-book-cover  International Journal of Engineering Trends and Technology (IJCTT)          
  
© 2022 by IJCTT Journal
Volume-70 Issue-4
Year of Publication : 2022
Authors : Zaid Ali Hussein, Haider L Aneed, Moayed Ahmed Hameed
DOI :   10.14445/22315381/IJCTT-V70I4P223

Citation 

MLA Style: Zaid Ali Hussein, et al. "Enhancement of the Performance of Automobile Refrigeration System by using a Cellulose Pad." International Journal of Engineering Trends and Technology, vol. 70, no. 4, Apr. 2022, pp. 272-277. Crossref, https://doi.org/10.14445/22315381/IJCTT-V70I4P223

APA Style:Zaid Ali Hussein, Haider L Aneed, Moayed Ahmed Hameed.(2022). Enhancement of the Performance of Automobile Refrigeration System by using a Cellulose Pad. International Journal of Engineering Trends and Technology, 70(4), 272-277. https://doi.org/10.14445/22315381/IJCTT-V70I4P223

Abstract
The automobile refrigeration system's performance and power-saving coefficient were evaluated experimentally in this study. The pad made of cellulose and water recirculated system is used for cooling the atmospheric air before passing the condenser and radiator of an automobile. The study was done on this case with and without using the cellulose pad. It measured the temperatures and pressures, and then the coefficient of performance and power saving have calculated at the peak period time (at 11 am, 12 am, and 1 pm). The discharge temperature also decreases when the use of a cellulose pad. The results illustrate the benefits of adding a cellulose pad up to the condenser and radiator of an automobile, the coefficient of performance has increased by about (27%) the isentropic efficiency of the compressor by about (10%) and the temperature reduction of the discharge temperature of the refrigerant about (13%).

Keywords
Cellulose pad, Evaporative cooling, Automobile refrigeration system.

Reference
[1] Mohammad Ali Fayazbakhsh, Majid Bahrami, Comprehensive Modeling of Vehicle Air Conditioning Loads using Heat Balance Method Conference Paper in Sae Technical Papers, (2013).
[2] S. Nikhil. Study and Optimize Performance Parameters of Air-Conditioner by using Waste Water of Water-Cooler. Int J Emergtechnol Adv Eng. . Boston: Mcgraw-Hil. 4 (2014) (1998) 2250 24l.
[3] Arfidian Rachman and Lisa Nesti Experimental Study to Performance Improvement of Vapor Compression Cooling System Integrated Direct Evaporative Cooler and Condenser Matec Web of Conferences, 215 (2018) 01017 .
[4] Mao-Yu Wen Et Al., Experimental Study on The Evaporative Cooling of An Air-Cooled Condenser With Humidifying Air Department of Mechanical Engineering, Cheng Shiu University, Kaohsiung 833, Taiwan, Roc.
[5] H. T. Dhaiban and M. A. Hussein, The Optimal Design of Heat Sinks: A Review, J. Appl. Comput. Mech., 6(4) (2020) 1030-1043. Doi:10.22055/Jacm.2019.14852.
[6] Mohammed Hamed Alhamdo using Evaporative Cooling Methods for Improving Performance of an Aircooled Condenser Universal Journal of Mechanical Engineering, (2015).
[7] Olufemi Sylvester Bamisaye Et Al. Investigation of The Effects of Air-Conditioning System on The Temperature and Speed of Automobile Engine using Paired T-Test and Regression Analysis Library Journal, (2019).
[8] Yunus A. Cengel, Michael A. Boles Thermodynamics: An Engineering Approach 6th Edition Mcgraw-Hill, (2008).
[9] Vijay Singh Bisht, A.K.Pratihar., Thermodynamic Analysis of Actual Vapour Compression System With R22 and Its Eco-Friendly Alternatives Refrigerants International Journal of Advance Research in Science and Engineering Ijarse, 3(3) (2014). Http://Www.Baghdad.Climatemps.Com/Graph.Php
[10] Yohannes Sudirwan, Wegie Ruslan Designing Hvac System of Vrv-A in Residential Unit by Cooling Load Calculation From DacsHkgsg Software V 2.05 and Hap Software V 4.90 Ssrg International Journal of Mechanical Engineering, 8(11) (2021) 8-17.
[11] Faez Abid Muslim Abd Ali Et Al., Enhancement The Performance of Compression Refrigeration Cycle by Cooling Condenser Air in Hot Climate Journal of Mechanical Engineering Research and Developments, 43(5) (2020) 307-317.
[12] Kasni Sumeru Et Al., A Review on Sub-Cooling in Vapor Compression Refrigeration Cycle for Energy Saving Jurnal Teknologi (Sciences & Engineering), 81(5) (2019) 155–170.
[13] Suresh Konda Et Al. (2017) Effect of High Engine Temperature on Performance and Characteristics of Ic Engine Ijariie, 2(2) (2017).