Methods of Making Laboratory Scale CPHMA Specimens
|International Journal of Engineering Trends and Technology (IJCTT)||
|© 2020 by IJCTT Journal|
|Year of Publication : 2020|
|Authors : Ludfi Djakfar, Wisnumurti, Lila Khamelda
|DOI : 10.14445/22315381/IJCTT-AIIC102|
MLA Style: Ludfi Djakfar, Wisnumurti, Lila Khamelda "Methods of Making Laboratory Scale CPHMA Specimens" International Journal of Engineering Trends and Technology (2020):6-9.
APA Style:Ludfi Djakfar, Wisnumurti, Lila Khamelda. Methods of Making Laboratory Scale CPHMA Specimens International Journal of Engineering Trends and Technology, 6-9.
The long-term objective of this research is to substitute the role of petroleum asphalt in road constructions with asbuton (asphalt concrete). This will not only have a positive impact in terms of empowering local resources, but also to increase the role of technology in asbuton use, as well as to decrease dependence on overseas asphalt supply. Abundant deposits of asbuton in Indonesia have not been utilized to their maximum potential, due to inadequate quality of asbuton, better performance of petroleum asphalt, and constraints related to supply chain. It has caused road contractors’ reluctance to use asbuton. One of the hurdles in production process is the need for a modifier to extract asbuton bitumen. To date, no material has been found which would be able to do the maximum extraction. Due to this constraint, users assumed that the lack of bitumen in asbuton would result in more asbuton needed to construct roads than petroleum asphalt with the same volume. This caused asbuton to be more expensive than petroleum asphalt. This research is the first step of a laboratory-scale testing on the application of modifier on CPHMA with many variables that affect the performance of asbuton, one of which is the method of making the test objects. The results of the study, obtained a method with the addition of the standing process after the submerging process gives better performance than conventional methods, while the application of the process in the field can be in the form of the use of roads which are delayed a day after the compaction process.
 Sumantoro. “Why should Indonesia import Asphalt?” https://www.kompasiana.com. [Accessed May 8, 2019). (in Indonesian).
 Hermadi, M. “Opportunities and Challenges for Asbuton Application in Road Construction,” Pusjatan, Bandung, 2008. (in Indonesian).
 Pusjatan. “Pusjatan Strategic Planning for Asbuton Application” 2015-2019, Pusjatan, Bandung, 2018. (in Indonesian).
 PUPR. “Ministry Regulation on the Application of Asbuton for Road Construction in Indonesia”, Jakarta, 2018. (in Indonesian)
 F. Affandi. “Characteristics of Asphalt Bitument in Hot Mix Asphalt”. Indonesian Road and Bridge Journal, 2008.
 T. M. W. Budiamin, S. H. Aly dan R. Djamaluddin. “Mechanical Characteristic of Hotmix Cold Laid Containing BGA and Flux Oil as WC”, ARPN Journal of Engineering and Applied Sciences, vol. 10, no. 12, pp. 5200-5205, 2015.
 L. Djakfar, H. Bowoputro, R. Akbariawan dan R. Fadiansyah, “The Effect of Limestone and Reheating Temperature on CPHMA”, International Journal of GEOMATE, vol. 12, no. 29, pp. 212-219, 2017.
 L. Djakfar, H. Bowoputro, Y. K. Wiyanta dan H. L. Baisa. “The Effect of Lime as Filler in the CPHMA mixtures,” Jurnal Transportasi, vol. 18, no. 1, pp. 21-28, 2018. (in Indonesian).
 F. Firstyan, G. Bagus, L. Djakfar dan H. Bowoputro. “The Effect of Compaction Temperature on the CPHMA Marshall Performance”, Civil Engineering Student Journal, vol. 1, no. 3, 2015. (in Indonesian)
 R. Akbariawan, R. Fadiansyah, L. Djakfar dan H. Bowoputro. “Evaluation of the Madura Limestone on the Performance of CPHMA”, Civil Engineering Student Journal, vol. 1, no 3, 2015. (in Indonesian).
 I. N. A. Thanaya, I. W. Suweda dan A. A. A. Sparsa. “Characteristic Comparison of Cold Paving Hot Mix Asbuton (CPHMA) Cold- and Hot-Compacted”, Jurnal Teknik Sipil, Vol. 24, No. 3, 2017. (in Indonesian).
 M. Tjaronge, S. Aly dan M. A. Syukur. “A Study of Tensile Strength of the CPHMA”, Jurnal Universitas Hasanudin, Vol 8, No 1, 2016. (in Indonesian).
 DGH. 2018 “Road and Bridge Construction Specification”, Jakarta: PUPR, 2018. (in Indonesian).
 Ministry of Public Work. “The Construction Procedure for the CPHMA,” Jakarta: PUPR, 2015. (in Indonesian).
 S. A. Magesa. “Asbuton Extraction Method using Emulgator Cocamide DEA”, 2012. (in Indonesian).
 L. Annas, D. Sarwono and Djumari. Asbuton Extraction using Texapon, e-Jurnal Matriks Teknik Sipil, vol. 1, no. 4, 2013. (in Indonesian).
 M. Sidiq, S. Rachmadani, A. Altway and S. Nurkhamidah. “Asbuton Extraction using Cerosin and Surfactan”, Jurnal Teknik Pomits, vol. 2, no. 2, 2013. (in Indonesian).
 L. Annas dan D. Djoko Sarwono. "Asbuton Extraction using Emulgator Texapon”, e-Jurnal Matriks Teknik Sipil, vol 6, no 1, 2015. (in Indonesian).
 D. Sarwono, D. C. Utama dan A. Setyawan. “Asbuton Extraction using 269M Emulsifier,” Konferensi Nasional Teknik Sipil 7, 2013. (in Indonesian).
 M. Halimi, I. B. Mochtar and A. Altway. “A Breakthrough in Asphalt Technology - Cheaper Bitumen Extracted from Asbuton, The Rock Asphalt of Buton Island, Indonesia”, International Journal of Education and Research, vol. 2, no. 8, 2014.
 A. A. Alamsyah. “The use of Pertamax as a Modifier for Lasbutag”, Media Teknik Sipil, vol. 9, no. 1, 2011. (in Indonesian).
 A. T. Mulyono. “The Effect of Modifier Variation on the Closed Graded Asbuton”, Media Teknik, vol. 5 (May), No. 1, 1996. (in Indonesian).
 H. Elazab, Y. Remiz, M. Radwan, M. A. “Sade. Synthesis and Characterization of Chitosan based Catalyst for Catalysis Applications”. International Journal of Advanced Trends in Computer Science and Engineering. Vol 9 No 1, 2020.
 H. Shehata, D. A. Ali, I. M. Al-Akraa, H. Elazab, H. Elsawy. “Development of Novel adsorbent for Industrial waste water treatment”. International Journal of Advanced Trends in Computer Science and Engineering. Vol 9 No 1, 2020.
Asbuton, bitument, CPHMA